Produktai skirti kanėlos kompleksas (6)

We manufacture steel constructions for water slides.

Unsere Kernkompetenz liegt in der Herstellung von Schmiedeteilen aus Stahl, Schmiedeteilen aus Edelstahl und Schmiedeteilen Aluminium in der Gewichtsklasse 0,1-6 kg.

EUROtrade S.A. Commercial Warehouses. EUROtrade S.A. Romney-Hangar steel buildings come in kit form travel all around the world. Their frame, made of joint semi-circular tubes or pillars offers a vast selection of 64 different models. Their aerodynamic design with curved surfaces, reduces to the minimum the exercised pressures, and thus allows mounting on a concrete floor with raw bolts which minimizes dramatically the cost of building works. This way, the overall budget of your investment shapes at an incredibly low level, and in combination to the very short erection time makes ROMNEY-Hangar buildings economical and attractive. EUROtrade S.A. Romney-Hangar Advantages Over 60 types of buildings Short delivery time Attractive prices Wide colour range Fast assembly from non-specialized team Immediate amortisation of the investment

Machine Parkour

Devam eden projelerimizden

In the injection moulding process TPE pellets are fed into the machine through a hopper and then into a heated barrel. The heat from the barrel turns the material into a liquid resin which is then injected into a closed mould under high pressure. After allowing the molten polymer to cool, the finished part can be removed from the mould. Injection moulding is a high-volume, high tooling cost process, the advanced properties of our TPE compounds deliver short cycle times allowing parts to be produced at a rapid rate. The information below is intended as a general overview, settings may vary depending on the specific grade selected. Please CONTACT US for detailed processing information Settings Equipment Conventional injection moulding machine Compression set At least 2:1. Special screws with short sections and higher compression ratios (3:1 to 4:1) may be good at low screw speeds Shrinkage Between 1.0% and 2.5% depending on the grade, type of application and location of the gate. Moul